Yahya Younis Mohsin Fathi AL-Obaidi -

Gender	MALE
Place of Work	Technical Agricultural College
Position	Teaching
Qualification	Master
Speciality	Agricultural machinery and equipment
Email	Mti.lec176.yahya@ntu.edu.iq
Phone	07701788400
Address	Mosul, Mosul, Ninevah, Iraq

Graduated from the College of Agriculture and Forestry, University of Mosul, Department of Agricultural Machinery and Equipment for the academic year 2011/2012. Completed my Master's degree in 2018 without extension. Appointment order issued for 2023 at the Technical College of Agriculture/Mosul. Prior to the appointment period, I worked as a lecturer and teacher of specialized courses in the field of agricultural machinery and equipment at the Mosul Technical Institute, Department of Agricultural Mechanization, since the academic year 2019.

Skills

echnical and specialized skills in agricultural mechanization in the field of animal production and comprehensive understanding of the principles of design, operation, and maintenance of various types of machinery and equipment used in animal production. (93%)

Familiarity with the latest technologies and innovations in the field of agricultural mechanization for animal production (94%)

Knowledge of the materials used in the manufacture of these machines, their characteristics, and durability. (90%)

An understanding of the various power systems used to operate agricultural machinery (94%)

amiliarity with occupational safety and health standards related to the operation and maintenance of agricultural machinery. (95%)

Publications

The Economic Feasibility for Operating the Algerian Combine Harvester PMA at Nineveh Area Conditions

Aug 28, 2024

Journal INTERNATIONAL JOURNAL OF RESEARCH AND INNOVATION IN SOCIAL SCIENCE (IJRISS)

publisher Yahya younis mohsin AL-Obaid

DOI https://dx.doi.org/10.47772/IJRISS.2024.808025

Issue VIII

Volume VIII

The study was conducted in Nineveh Governorate by conducting a comparison of agricultural crops (wheat, barley, lentils) for the seasons (2014 – 2015 – 2016) to determine the economic feasibility of operating the Algerian combine harvester (PMA) and its impact on some of the factors and characteristics studied. (A. Maintenance before operation B. Maintenance during operation C. Oils, greases and fuel, D. Transportation costs E. Food costs F. Costs of technicians and administrators G. revenues from the three crops) The data was analyzed according to the design (R.C.B.D.) and the results were as follows: A. The year 2016 recorded the lowest pre-operation maintenance cost, reaching 862000 dinars, while the year 2014 recorded the highest value, reaching 863667 dinars, B. The year 2014 recorded the lowest value, reaching 647667 dinars, while the year 2016 recorded the highest value, reaching 920933 dinars, C. The year 2014 recorded the lowest value, reaching 210000 dinars, while the year 2016 recorded the highest value, reaching 633667 dinars, D. The year 2016 recorded the lowest value, reaching 378333 dinars, while the year 2015 recorded the highest value, reaching 718667 dinars, E. The year 2016 recorded the lowest value, reaching 171466 dinars, while the year 2016 recorded the highest value, reaching 232000 dinars, F. The year 2016 recorded the lowest value, reaching 139133 dinars, while the year 2015 recorded the highest value, reaching 917000 dinars, G. The year 2015 recorded the highest value of revenues for crops, respectively (wheat, barley, lentils), while the year 2016 recorded the lowest value of revenues for crops, respectively (wheat, barley, lentils).

Read Publication

EVALUATION OF HEAVY CHISEL PLOW PERFORMANCE IN DIFFERENT DEPTH IN TERMS OF SOME MECHANICAL PERFORMANCE INDICATORS

Sep 29, 2019

Journal Mesopotamia Journal of Agriculture

publisher Yahya younis mohsin AL-Obaid

DOI https://magrj.mosuljournals.com/index.php/magrj/article/view/1234

Issue 1

Volume 47

This study was conducted to evaluate the performance for chisel plow at the end of January in during agricultural season ( 2018) In the area of Baweizah of the district of Talkif / Ninavah province which is located north east of the city of Mosul Which is far (13) Km about center of the city. The Soil texture was silty clay by using two levels of factory of level plowing, the first level was add the roller reducer on the chisel plow and the second level was remove the roller reducer from the chisel plow . Also two levels of depth plow .The first was (8-10 cm) and the second was (12-14 cm). to study their effect in some mechanical properties , the experience was factorial with three replication .the important results are in the following: excelled (add the roller reducer) in the following properties ( Volume of soil disturbed, Depth achieved ,The appearance tillage), while the level (remove the roller reducer) excelled in properties (Draft power ,specific resistance), while does not appear any moral differences in the following properties (Fuel consumption) . At same time excelled the depth (8-10) cm in the following properties (Fuel consumption, performance efficiency, The tillage appearance). While Second depth(12-14) cm excelled in the following properties (Volume of soil disturbed, specific resistance, Depth actual of plowing). while does not appear any moral differences in the following properties (Draft force) . Register The interaction between the first level tillage (add the roller reducer) and the first depth (8-10) excelled on the following properties (performance efficiency, The tillage appearance) while the interaction between the first level tillage (add the roller reducer) and Second depth (12-14)cm achieved moral superiority in the following properties (Volume of soil disturbed, Depth actual of plowing), while the interaction between the Second level tillage (remove the roller reducer) and the first depth ( 8-10) cm record moral superiority in the properties(Fuel consumption). while the interaction between the Second level tillage (remove the roller reducer) and Second depth (12-14)cm moral superiority in the following properties (Draft force, specific resistance) .

Read Publication

Evaluation of heavy chisel plow performance in different speeds in terms of some mechanical performance indicators

Jan 21, 2019

Journal Mesopotamia J. of Agric.

publisher Yahya younis mohsin AL-Obaid

DOI https://magrj.mosuljournals.com/index.php/magrj/article/view/1234

Issue 1

Volume 47

This study was conducted to evaluate the performance of heavy chisel plow at the end of January during agricultural season ( 2018) In the area of Baweizah of the district of Talkif / Ninavah province which is located north east of the city of Mosul Which is far (13) Km about the city center.Soil texture was silty clay by using two levels of factory of level plowing, the first level was add the tubular roller on the chisel plow and the second level was without the tubular roller from the chisel plow . also two levels of depth plow .the first was (8-10 cm) and the second was (12-14 cm) and three levels of speed included ( 2.4, 4.3 and 7.1) km/h. to study their effect in some mechanical properties , the experience was factorial with three replication . The differences have been tested by Duncan.the important results are in the following: excelled (add the tubular roller) in the following properties (,Volume of soil disturbed,depth achieved,the appearance tillage), while the level (withput roller reducer) excelled in properties (Draft force ,specific resistance), while does not appear any moral differences in the following properties (Fuel consumption).At same time excelled the speed (2.4)km/h in the following properties (Draft force, specific resistance, Depth actual of plowing), While the speed (7.1)km/h excelled in the following properties (Fuel consumption ,volume of soil disturbed, the appearance tillage). Register The interaction between the first level tillage (add the roller reducer) and the first forward speed (2.4) km/h record moral superiority in the following properties (Depth actual of plowing) while the interaction between the first level tillage and the Third forward speed (7.1) km/h record moral excelled in the properties (Volume of soil disturbed ,The appearance tillage), while the interaction between the Second level tillage (without the tubular roller) and the first forward speed (2.4)km/h moral excelled in the following properties (Draft force, specific resistance), while the interaction between the second level tillage (without the tubular roller) and the third forward speed (7.1) km/h moral excelled in the properties(Fuel consumption)

Read Publication